Privacy Handset 9555 Docks (RST755I)

RST755I_MountedR_Lrg1

Beam Communications undertakes warranty and out of warranty servicing across our extensive product range.
For further information on our servicing process, warranty items and conditions please click on the button below.

Frequently Asked Questions

Intelligent/Privacy Handset

Q.Why does the “Hands free” mode not working when using a privacy handset plugged in?
A.

The privacy handset must be in the cup in order for hands free operation to work.

Voice

Q.I cannot hear through the privacy handset/hands free option of my Inmarsat docking station. The handset gets signal when docked. I can make and receive calls but I can only hear through the handset and not through the privacy handset/hands free feature.
A.

The handset should recognise that it is docked, therefore the USB symbol on the handset should appear and charging is enabled.

Make sure there is power in the dock, the dock's buttons should light up.

If the USB symbol is absent, check the dock's USB connector whether it is broken or submerged. This fault needs to be returned to a Beam for repair.

If the USB symbol is present, and the speakerphone works, it is possible that there is a problem with the privacy handset. Make sure the privacy handset is plugged in the correct port, not the POTS port. Else, this dock needs to go back to Beam for repair.

Shipping/Compliance

Q.Are Beam products safe to use in explosive environments?
A.

Beam products are not certified for safety in explosive environments.

Frequently Asked Questions

Intelligent/Privacy Handset

Q.Why does the “Hands free” mode not working when using a privacy handset plugged in?
A.

The privacy handset must be in the cup in order for hands free operation to work.

Voice

Q.I cannot hear through the privacy handset/hands free option of my Inmarsat docking station. The handset gets signal when docked. I can make and receive calls but I can only hear through the handset and not through the privacy handset/hands free feature.
A.

The handset should recognise that it is docked, therefore the USB symbol on the handset should appear and charging is enabled.

Make sure there is power in the dock, the dock's buttons should light up.

If the USB symbol is absent, check the dock's USB connector whether it is broken or submerged. This fault needs to be returned to a Beam for repair.

If the USB symbol is present, and the speakerphone works, it is possible that there is a problem with the privacy handset. Make sure the privacy handset is plugged in the correct port, not the POTS port. Else, this dock needs to go back to Beam for repair.

Shipping/Compliance

Q.Are Beam products safe to use in explosive environments?
A.

Beam products are not certified for safety in explosive environments.